Eastern
White Pine
Beauty & durability engineered to give you one of the most
stable and attractive finishes.
Shown Here in 8x12 German Chink.
Poplar
A very attractive wood & when dried and laminated it produces a
superior log home and heavy timber product.
Shown Here as a 3x9 Poplar beam.
We use a very special process to ensure our
logs do not crack, shrink, warp or have settling problems. Any
solid piece of wood, greater than 10cm x 10cm will most likely
eventually crack as a result of moisture loss. In our
kiln-drying and lamination process we reduce the moisture level
to between 10% & 12% and laminate 5cm planed boards to eliminate
these problems.
The resulting cant can then be passed through
a log profiler in the same way as “traditional” logs. The only
difference being that none of the “traditional” problems will be
present in our logs, and the ongoing maintenance will be
absolutely minimal.

Pre-cut Kits
All our log homes are pre-cut at the factory. Milling of the
logs is computer
controlled, based on the CAD (Computer Aided Design) system used
in the design of the house. We pre-cut logs, roof systems, floor
systems and stairways. Then each section of the home is
pre-assembled to ensure absolute accuracy and a perfect fit.
We use and “end spline” system where windows
and doors meet the log walls, to ensure airtight & watertight
seals at each joint.

Interlocking Corner
System
Our Interlocking Saddle Notch corner system ensures the log
corners seal tight and remain trouble free for the life of the
log home. At Log Homes Europe we’re proud of the quality of our
products and the craftsmanship and years of experience that goes
into them. With our expertise you really can achieve your
dreams!

